Loading

LED Explosion Proof Light Fixtures
12 to 24 VDC Solar Off Grid Compatible

A project for a high lumen low voltage emergency lighting system in an explosion proof environment brought the discovery of these made in the USA LED explosion proof light fixtures that will operate on a solar powered off grid system that defaults if grid power fails.

These 48 inch 24 watt LED tube lamps put off an amazing 2,160 lumens per tube, 4,320 lumens per fixture at 8 feet with a load of only 4 amps at 12 volts.  The fixture is actually multi-voltage and will work from 9 to 28 volts and is ballast free.

Higher voltage are also available.  At 115 VAC the load is 0.4 amps.

Four lamp fixtures are also available.

The fixtures and lamps are UL 844 certified for Class I Division and Class II Division I, specifically:

  • Class I, Division 1, Groups C and D

  • Class I, Division 2, Group A, B, C and D

  • Class II, Division 1 and 2, Groups E, F and G

They are also rated for harsh environments:

  • UL 595 Outdoor Marine Type (Saltwater)

  • UL 844, 924

  • UL 1598 Marine Type

And they are also certified for C UL Certified for Canadian Safety Approval Standards.

Typical applications include:

  • Dust ignition areas in bakeries, food processing

  • Powder handling and dispensing areas

  • Enclosed fueling stations

  • Open cell battery charging stations

  • Aircraft maintenance and repair

  • Automotive maintenance and repair

  • Paint spray booths

  • Refineries

  • Grain handling terminals

  • Chemical manufacturing and processing

  • Solvent based glue booths

  • Parts cleaning booths

  • Flammable gas processing plants

  • Land and offshore oil and gas rigs

  • Emergency lighting in explosion proof environments

LED Lighting Advantages:

  • Energy cost savings

  • 50,000 hours lamp life

  • Reduced lighting maintenance

  • Highly resistant to vibration

  • Operate in extreme temperatures -20 C to 40 C = -4 F to 104 F

  • Impact and heat resistant Pyrex lamp tubes

Product Specifications:

  • 52 x 11.25 x 8.5 inches LxWxH

  • Weight 45 pounds

  • Beam angle 150 degrees

  • Color temperature 4500K (5600K and 6500K also available)

  • Color Rendering Index 76

  • Standard end mounting via Unistrut to standard L-bracket mounts which can be adjusted to create angle mounts to be attached to any wall, ceiling or floor surface.

  • Pendant suspension mount also available

  • Single junction box at one end for electrical connection

  • Wiring Hub Size 1/2 inch threaded

  • Spring loaded sockets on both ends hold lamps firmly for maximum shock and vibration protection.

  • Re-lamping can be done from one end of the fixture

  • Lamp access covers are interchangeable screw type with O-ring seals

  • Fixture constructed of extruded corrosion resistant copper free aluminum alloy

  • Heavy gauge extruded aluminum reflectors (2.5 mm thick) with high gloss reflective finish

  • Dent and corrosion resistant

  • 3 year limited warranty replacement on LED bulbs

Delivery is from stock to three days.  Please contact us today for assistance with your applications and pricing or call +1.720.575.7600.

Back To The Top

   

A partial list of the brands we sell. If you need help please inquire, we have it.

Find out more about renewable energy incentives at dsireusa.org.